Digital Spectrum MemoryFrame MF-8000 Especificaciones descargar pdf (Pagina 151)

100

101

Select a free COM port and fill in the settings accordingly (do not select Handshaking if your

controller does not use it: this may lock up the program).

Default command format is ASCII. If you use the Hexadecimal format, check HEX.

Band/Segment

The Band/Segment option defines the way the band data are defined.



If BAND is checked (default), band data are defined for each band (GEN, 160m to 70cm).



If SEGMENT is checked (for Expert) band data are defined for each segment of the band

plan under Preferences/Transceiver/Band plan .

10m and 80 m sub-bands

By default the program splits the 10m band in two sub-bands. You may choose spliting of the 80m

band and/or define the limit for each subband. The choice of the sub-band applies to many

parameters such as: band decoder, antenna, rotor...

COMMAND FORMAT

Parallel port

You use a BCD (Binary Coded Decimal) format on 8 bits which allows controlling pins 2 to 9 of

the parallel port. The default format emulates a Yaesu radio on pins 2-5: you can always

return to the Yaesu format by clicking the Default button.

You may program pins 2 to 9 by modifying the strings assigned to each band. Each character

of the string represents the state of a pin (from 2 to 9), as follow :

"0" : low state

"1" : high state

"-" : not used

"a-d": see SO4R

Examples :

1100---- : pins 2 and 3 are at a high state, pins 4 and 5 are at a low state, pins 6 to

9 are not programmed

10010000 : pins 2 and 5 are at a high state, other pins are at a low state

Page 151

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 422 423

Comentarios a estos manuales

Sin comentarios

Digital Spectrum MemoryFrame MF-8000 Especificaciones Pagina 151

Comentarios a estos manuales

Relacionado con productos y manuales para Marcos de fotos digitales Digital Spectrum MemoryFrame MF-8000